**********************************************************************
LOVLYNET SPECIFICATION
Title: FILEREF Kludge for File-Referenced Echomail Threads
Draft: 1
Date: 2026-03-17
Status: Draft - LovlyNet Standards Council
**********************************************************************
1. INTRODUCTION
---------------
This document defines the FILEREF kludge line for use in LovlyNet and
other FTN-compatible echomail messages that discuss a specific
distributed file. Its purpose is to provide a machine-readable
association between an echomail thread root and a file carried in a
networked file area.
The FILEREF kludge allows participating software to display comments or
discussion threads alongside the referenced file without requiring any
out-of-band mapping database shared between systems. Legacy software
that does not recognize the kludge continues to see an ordinary
echomail message with a normal human-readable subject.
This specification is issued as a LovlyNet Standards Council (LSC)
draft for implementation and review within LovlyNet-compatible
software. Other FTN-compatible software MAY adopt it independently.
2. DEFINITIONS
--------------
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in FTA-1006.
"Kludge line": A line in a FidoNet message body beginning with the
ASCII SOH character (0x01), used to carry machine-readable metadata
not intended for direct display to the end user.
"File area identifier": A stable identifier naming a distributed FTN
file area, consisting of an area tag and domain joined by `@`.
"Thread root": The top-level echomail message that begins a discussion
thread. Replies are descendants of that message via normal FidoNet
threading mechanisms such as MSGID/REPLY.
3. THE FILEREF KLUDGE
---------------------
3.1 Syntax
The FILEREF kludge line has the following syntax:
^AFILEREF: <area-id> <filename> <sha256>
where ^A represents the ASCII SOH character (0x01), <area-id> is the
network-visible file area identifier in the form `<tag>@<domain>`,
<filename> is the canonical distributed filename, and <sha256> is the
SHA-256 hash of the referenced file encoded as 64 hexadecimal
characters.
Example:
^AFILEREF: NODELIST@fidonet NODELIST.Z53 3e7d2f4c0d0e7f7fe1b6a3f01f7a9a4a7b4b9b0c1d2e3f405162738495a6b7c
3.2 Field Requirements
The <area-id> and <filename> fields MUST each be a single token and
therefore MUST NOT contain whitespace.
The <area-id> field MUST contain exactly one `@` separator, with the
area tag on the left and the network domain on the right. Both
components MUST be non-empty.
The <sha256> field MUST be exactly 64 hexadecimal characters. Emitting
software SHOULD use lowercase hexadecimal, though receiving software
SHOULD compare the value case-insensitively.
This specification assumes the filename used on the FTN wire is already
compatible with token-based parsing. Software that permits local
filenames containing spaces or other transport-hostile characters
SHOULD normalize them before distribution and SHOULD emit FILEREF using
that canonical distributed filename.
3.3 Placement
The FILEREF kludge SHOULD be placed with other kludge lines at the
beginning of the message body, before any visible text content, in
accordance with common FidoNet kludge conventions.
A message body SHOULD NOT contain more than one FILEREF kludge line. If
multiple FILEREF kludge lines are present, implementations SHOULD use
the first one encountered and ignore the remainder.
3.4 Scope
The FILEREF kludge identifies the file discussed by the message and its
thread descendants. It is primarily intended for use on the thread root.
Reply messages in the thread SHOULD rely on normal MSGID/REPLY
threading rather than repeating the FILEREF kludge on every message.
4. MATCHING SEMANTICS
---------------------
Software matching a message thread to a local file MUST treat the
combination of <area-id>, <filename>, and <sha256> as the authoritative
reference tuple.
Two FILEREF kludges match if and only if:
- <area-id> matches exactly as a fully qualified `<tag>@<domain>`
identifier
- <filename> matches the canonical distributed filename exactly
- <sha256> matches case-insensitively as a 64-character hexadecimal
SHA-256 digest
If the local system carries the same area identifier and filename but the
SHA-256 digest differs, the FILEREF MUST be treated as referring to a
different file revision or different file content.
5. BEHAVIOR OF CONFORMING SOFTWARE
----------------------------------
5.1 Message Authors and Editors
Software creating a new top-level echomail discussion for a specific
file MAY insert the FILEREF kludge on that thread root.
When the FILEREF kludge is used, the message subject SHOULD remain a
human-readable filename or other plain-text subject that is useful on
software that does not support FILEREF.
5.2 Message Readers and File Browsers
Software that encounters a FILEREF kludge:
- SHOULD parse and preserve the referenced tuple exactly.
- MAY use the tuple to associate the thread root and its replies with
a local file record.
- SHOULD verify the SHA-256 value against the local file before
presenting the message as commentary on that file.
- SHOULD fall back to ordinary echomail display if no matching local
file is available.
5.3 Tosser and Packer Behavior
Tossers, packers, and other mail-handling software MUST NOT alter,
strip, or otherwise modify the FILEREF kludge line during normal
message handling. The kludge MUST be preserved through normal FidoNet
message routing processes.
5.4 Unknown or Unsupported Implementations
Software that does not recognize FILEREF MUST ignore its semantic
meaning and continue to process the message as ordinary echomail.
6. INTEROPERABILITY GUIDANCE
----------------------------
The FILEREF kludge is designed to coexist with software that has no
knowledge of file-comment linkage. To maximize interoperability:
- Authors SHOULD use a normal visible subject, typically the filename.
- Readers MAY use ordinary subject matching as a non-authoritative
fallback when interacting with replies from software that preserved
the thread but did not originate or interpret FILEREF.
- Implementations SHOULD treat FILEREF as authoritative when present
and valid, and subject matching only as a best-effort heuristic.
This allows discussion threads to remain readable and replyable across
mixed software environments while still enabling exact matching between
conforming implementations.
7. SECURITY AND ROBUSTNESS CONSIDERATIONS
-----------------------------------------
Receiving software MUST treat FILEREF contents as untrusted input.
Implementations SHOULD validate all three fields before acting on them.
Software MUST NOT assume that a matching area tag and filename alone are
sufficient for identity. The SHA-256 digest is required to distinguish
similarly named or superseded files and to avoid false associations.
Implementations SHOULD avoid using FILEREF to expose inaccessible or
private files to unauthorized users. Authorization to view the file or
the related message thread remains a local policy decision.
8. IMPLEMENTATION NOTES
-----------------------
FILEREF defines only the transport-level declaration mechanism. It does
not standardize how a user interface presents comments, how comment
counts are cached, or how local database schemas model file metadata.
An implementation MAY choose to attach FILEREF only to the first
top-level message in a thread and then rely on normal threading for
replies. This is the RECOMMENDED model because it avoids redundant
metadata while preserving exact cross-node matching for the thread root.
9. REFERENCES
-------------
[1] FTS-0001 - A Basic FidoNet(r) Technical Standard
[2] FTS-0009 - The MSGID and REPLY kludges
[3] FTA-1006 - Key words to indicate requirement levels
10. REVISION HISTORY
--------------------
2026-03-17 Initial LovlyNet specification draft for the FILEREF
kludge.
**********************************************************************
END OF DOCUMENT
**********************************************************************
|
Download
